3M SPRAY MOUNT


Jumlah

Ketersediaan : Tersedia

Rp 185.000

BELI / BUY

3M Spray Mount™ is a one-surface, clear adhesive with long-aging, quick tack, low soak-in, non-staining and non-wrinkling capabilities. Spray Mount™ is repositionable but becomes permanent when dry. If you are looking for a spray adhesive that will mount vellum, tissue and other delicate papers, then Spray Mount™ is perfect for you!

COMMONLY USED SURFACE-TO-SURFACE APPLICATIONS ARE:

  • Paper
  • Film
  • Tissue
  • Newsprint

DIRECTIONS & TIPS FOR USING 3M SPRAY MOUNT SPRAY ADHESIVE:

Spray 15 to 20-cm away from object at a 90-degree angle in both directions for full coverage. Don’t spray too fast. Once sprayed, let dry one minute or until tacky, then make bond.

SPECIAL TIPS: Shake can well before use. Make sure nozzle is pointed at object to be adhered. TEMPERATURE RECOMMENDATIONS/LIMITATIONS: Performs best when applied at room temperature.

CURE RATE & DRYING TIME: 5 minutes

GAP FILLING ABILITY: Good. Adhesive will fill small gaps to create stronger bond.

CLEAN UP & REMOVAL RECOMMENDATIONS: Use a solvent based cleaner.

CAUTION ADVISORIES OR SAFETY RECOMMENDATIONS: Use in a well-ventilated area. Do not store at temperatures above 49-degrees Celcius. Avoid skin and eye contact.