Hanna HI 98115

• Water resistant
• On-screen tutorial messages for calibration
• Switch parameters at the touch of a button
• Automatic Temperature Compensation for pH and conductivity
• Simple calibration; Dials located on the front panel makes calibration quick and simple, even for non-technical users
• BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings
• Battery % displayed on startup
• Fast response probe included

Range

pH 0.0 to 14.0 pH

EC 0 to 6000 µS/cm

TDS 0 to 3000 mg/L (ppm)

Temperature 0 to 60°C

Resolution

pH 0.1 pH

EC 10 µS/cm

TDS 10 mg/L

Temperature 0°C

Accuracy

pH ±0.1 pH

EC ±2% F.S.

TDS ±2% F.S.

Temperature ±0.5°C

TDS Conversion Factor 0.5 mg/L = 1 µS/cm

Calibration manual at 1 point (all parameters except temperature)

Temperature Compensation Automatic, 0 to 50°C with ß = 2%/°C (EC/TDS only)

Probe HI 1285-5 polypropylene body, pre-amplified multiparameter probe with internal temperature sensor, 8-pin DIN connector and 1 m (3.3’) cable (included)

Battery Type / Life 9V / approximately 150 hours of continuous use Environment 0 to 50°C (32 to 122°F); RH max 100%

Dimensions 145 x 80 x 36 mm

Weight 230 g